Lenz Digital 60101 Lenz DCC starter set with LH101 controller and LZV200 command station

For large model railway layouts where many motor vehicles, points and signals are used.

This set requires a transformer to operate - sold separately as Lenz 26001 (3 Amp) or 26151 (4.6 Amp)

• for up to 9999 digital motor vehicles and 1 analog locomotive
• setting of 4-digit locomotive addresses
• 14, 27, 28 or 128 speed steps
• 28 functions for each locomotive
• double- and multiple-traction
• the setting of automatic control is optional
• Separate Programming track outputs
• CV programming from CV1 to CV1024
• higher requirements are met by adding (an infinite number of) additional amplifiers - LV103
• connect up to 31 input devices to our universal input bus XpressNet.
• programming in operational mode (PoM)
• up to 2048 points, signals and other magnetic articles can be switched, depending on the control device used.
• feedback bus to connect feedback modules and switch decoders that support the feedback function.
• The LZV200 can generate the RailCom Signal (Global RailCom from LH101 V2.0)
• Model Clock (LH101 V2.0)
• Integrated USB PC Interface
• Future updates can be applied using a memory stick
• Each set comes with a LZV200 device (which is an amplifier plus command station) and an LH101 hand-held control device.

Link to full manual can be found here.